The first application should be made, if possible, at the 2- to 3-leaf stage. The second and third applications should be made 14 days after the previous application.
Add wetting agent to reduce surface tension of water.
Spraying nozzle diameter: 150 - 300μm.
Spraying pressure: ≥ 3 bar.
The equipment used to spray Silabaal® should be cleaned before use.
Silabaal® is not water-soluble. Therefore, it must be thoroughly mixed to ensure an even dispersion in the water.
Continuous agitation is required to prevent Silabaal® from settling at the bottom of the spray tank. If sediment nevertheless accumulates on the bottom of the tank, stop the spraying operation immediately and re-establish a uniform suspension by vigorous stirring before continuing
The prepared emulsion should be used as soon as possible after mixing.
Silabaal® can be combined with all commercially available fertilizers and plant protection products.
The spraying is best done in the early morning hours when the plant stomata are open and most receptive .
